Electronics
Electronic components, sensors and independent modules for making circuits. Modules Resistors Lighting Capacitors Transistors Diodes Potentiometers Other electronics Sensors Sound Inductors Voltage regulators Oscillators Microcontrollers
2428 results Sort by
- RJ45 Ethernet MagJack-Compatible Sparkfun #PRT-08534 "Boost your network connectivity with our compact RJ45 Ethernet MagJack-Compatible. Ideal for set-top boxes and other devices, it offers easy troubleshooting with status LEDs and superior protection against interference. Trusted Sparkfun product."Delivered in 5 to 10 days€ 3,00 Incl. VAT
- 4-channel I2C-safe Bi-directional Logic Level Converter Adafruit #757 Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.Delivered in 10 to 30 days€ 5,70 Incl. VAT
- Resistor Kit - 1/4W (500 total) Sparkfun #COM-10969 Stay organized with the Sparkfun Resistor Kit - 1/4W (500 total). Perfect for electronic enthusiasts, it offers a wide range of resistors neatly packed and labeled for easy identification. Never lose a resistor again!Delivered in 5 to 10 days€ 12,65 Incl. VAT
- SparkFun Essential Sensor Kit V2 Sparkfun #SEN-20408 Explore a world of electronic exploration with the SparkFun Essential Sensor Kit V2. Perfect for beginners and experienced programmers, this kit includes a variety of sensors for sensing acceleration, force, vibration, light, temperature, and more.Delivered in 5 to 10 days€ 38,55 Incl. VAT
- Non-Invasive Current Sensor - 30A Sparkfun #SEN-11005 Monitor and manage power usage effectively with the Non-Invasive Current Sensor - 30A by Sparkfun. Ideal for DIY energy monitors or over-current protection devices. Easy to use and safe, no direct contact needed.Delivered in 5 to 10 days€ 11,35 Incl. VAT
- LED - Red with Resistor 5mm (25 pack) Sparkfun #COM-14560 Get Sparkfun's 5mm red LEDs with built-in resistors, perfect for various projects. This pack of 25 LEDs operates within a 2.0V-5.0V range and comes in reusable ESD safe packaging. Ideal for hobbyists and professionals.Delivered in 5 to 10 days€ 16,85 Incl. VAT
- LED - Green with Resistor 5mm (25 pack) Sparkfun #COM-14563 Get the hassle-free Sparkfun LED - Green with Resistor 5mm (25 pack). These 3.0V to 5V LEDs come with built-in resistors, perfect for DIY projects. Packaged safely and emits 15000-20000 MCD brightness.Delivered in 5 to 10 days€ 13,80 Incl. VAT
- PicoBuck LED Driver Sparkfun #COM-13705 Get the user-friendly PicoBuck LED Driver Version 12. Manage and blend three distinct LEDs across separate channels. Adjust the default 330mA channel operation with an analog voltage or PWM signal. Now with an upgraded voltage regulator and a solderable jumper to double the current to 660mA.Delivered in 5 to 10 days€ 20,80 Incl. VAT
- SparkFun TeensyView Sparkfun #LCD-14048 "Enhance your Teensy development board with the SparkFun TeensyView. This compact, white-on-black OLED display offers seamless integration, flexibility, and a convenient way to visualize data. Ideal for wearable projects and embedded systems."Delivered in 5 to 10 days€ 19,50 Incl. VAT
- Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface Adafruit #815 You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM outputs! What now?Delivered in 10 to 30 days€ 17,00 Incl. VAT
- HDMI 5" 800x480 Display Backpack - With Resistive Touchscreen Adafruit #2260 Its a mini panel-mountable HDMI monitor with a built-in resistive touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail.Delivered in 10 to 30 days€ 85,70 Incl. VAT
- SparkFun Pro nRF52840 Mini - Bluetooth Development Board Sparkfun #DEV-15025 The SparkFun Pro nRF52840 Mini is a high-powered development board with an ARM Cortex-M4 CPU and a 2.4GHz Bluetooth radio. It features a USB interface, LiPo battery charger, and supports Arduino, Circuit Python, or C programming. Ideal for professional developers and hobbyists alike.Delivered in 5 to 10 days€ 40,35 Incl. VAT
- SparkFun Line Sensor Breakout - QRE1113 (Analog) Sparkfun #ROB-09453 Boost your line sensing projects with the SparkFun Line Sensor Breakout - QRE1113 (Analog). Versatile, compact and easy to use, it's perfect for 3.3V and 5V systems. Ideal for line following robots.Delivered in 5 to 10 days€ 15,30 Incl. VAT
- LilyPad Vibe Board Sparkfun #DEV-11008 Compact, powerful, and discreet, the LilyPad Vibe Board is a 5V vibration motor ideal for wearable technology. Part of the innovative LilyPad series, it's designed for easy integration and durability. Sales support e-textiles education.Delivered in 5 to 10 days€ 8,85 Incl. VAT
- 2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi Adafruit #945 This 8"/200mm long swivel dipole antenna has 5dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as:2.4GHz Wi-Fi (802.11b/g/n)2.4GHz XBeeBluetoothOther 2.4GHz transceiversAntenna comes with theDelivered in 10 to 30 days€ 12,65 Incl. VAT
- ACS724 Current Sensor Carrier -50A to +50A Pololu #4049 This board is a simple carrier of Allegro’s bidirectional ±50A ACS724LLCTR-50AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS.Delivered in 5 to 14 days€ 8,75 Incl. VAT
- ACS724 Current Sensor Carrier 0 to 30A Pololu #4046 This board is a simple carrier of Allegro’s unidirectional 30A ACS724LLCTR-30AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS.Delivered in 5 to 14 days€ 7,55 Incl. VAT
- ACS724 Current Sensor Carrier -20A to +20A Pololu #4045 This board is a simple carrier of Allegro’s bidirectional ±20A ACS724LLCTR-20AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS.Delivered in 5 to 14 days€ 7,55 Incl. VAT
- ACS724 Current Sensor Carrier -5A to +5A Pololu #4041 This board is a simple carrier of Allegro’s bidirectional ±5A ACS724LLCTR-05AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS.Delivered in 5 to 14 days€ 7,55 Incl. VAT
- ACS724 Current Sensor Carrier 0 to 10A Pololu #4042 This board is a simple carrier of Allegro’s unidirectional 10A ACS724LLCTR-10AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS.Delivered in 5 to 14 days€ 7,55 Incl. VAT
- SparkFun WiFi IR Blaster (ESP8266) Sparkfun #WRL-15031 Control your old IR devices via WiFi with the SparkFun WiFi IR Blaster. Features ESP8266 WiFi/microcontroller SoC, IR emitters, and receivers. Soldering required. Includes LTE-302 IR Emitter and TSOP382 IR Detector.Delivered in 5 to 10 days€ 26,50 Incl. VAT
- Pololu High-Power Stepper Motor Driver 36v4 Pololu #3730 This discrete MOSFET stepper motor driver enables control of one bipolar stepper motor. It supports a wide 8 V to 50 V operating voltage range and can deliver up to 4 A continuous per phase without a heat sink or forced air flow (6 A max with sufficient additional cooling).Delivered in 5 to 14 days€ 23,85 Incl. VAT
- Arduino MKR WiFi 1010 Arduino #ABX00023 The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It's equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption.Delivered in 14 to 30 days€ 30,10 Incl. VAT
- Arduino MKR ETH Shield Arduino #ASX00006 Are you developing a project for an environment where wireless connections are unavailable or would be inefficient? The MKR ETH shield allows to have a wired Ethernet connection between your MKR board and your network or the Internet.Delivered in 14 to 30 days€ 27,35 Incl. VAT
- FTDI Friend + extras Adafruit #284 Note: These use genuine FTDI chips, either we purchase them or they are manufactured to our specifications with the requirement of genuine FTDI chips 10/22/14 - read more.Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme!Delivered in 10 to 30 days€ 23,00 Incl. VAT
- WAV Trigger Sparkfun #WIG-13660 Get high-quality, polyphonic audio playback with the Sparkfun WAV Trigger. Support for up to 2048 uncompressed 16-bit, 44.1kHz wav files, 14 stereo tracks, and MIDI control. Features real-time pitch control and ample storage space.Delivered in 5 to 10 days€ 63,70 Incl. VAT
- MP3 Trigger Sparkfun #WIG-13720 Enhance your sound integration with our MP3 Trigger board. It features 18 trigger pins, full-duplex control port, and supports up to 256 tracks. It uses micro-SD flash memory cards and delivers 192Kbps stereo playback. Ideal for custom applications.Delivered in 5 to 10 days€ 54,90 Incl. VAT
- Sound effect generator (police, fire brigade, ambulance, machine gun) - kit Whadda #WSAH113 This kit contains the parts and the circuit board to build a sound effect generator. The module can generate 4 different sounds: police, fire brigade, ambulance, machine gun. The playback speed can be adjusted with the potentiometer on the board. Includes on / off switch and loudspeaker.Delivered in 3 to 7 days€ 11,40 Incl. VAT
- 10Amp 5V-30V DC Motor Driver (2 Channels) Cytron #MDD10A The MDD10A is the dual-channel version of MD10C which is designed to drive 2 brushed DC motors with high current up to 10A continuously. Like MD10C, MDD10A also supports locked-antiphase and sign-magnitude PWM signal.Delivered in 5 to 30 days€ 25,15 Incl. VAT
- SparkFun Transparent OLED HUD Breakout (Qwiic) Sparkfun #LCD-15079 SparkFun's Qwiic Transparent OLED HUD, designed for vehicle heads-up displays, shines brightly in low light & remains visible in daylight. User-friendly & solder-free with Arduino library.Delivered in 5 to 10 days€ 112,20 Incl. VAT
- Mini infrared security system - 7 m Velleman #PEM7D This small security system consists of a light barrier, speaker and stabilized power supply. When the IR light beam is interrupted, an alarm can be set for 30 seconds or a short bell like when entering a store. The trigger time (delay until the sound is played) and volume can be adjusted.Delivered in 3 to 7 days€ 66,70 Incl. VAT
- SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2 Sparkfun #SEN-11084 Get precise altitude, pressure, & temperature readings with the SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2. Ideal for drones, weather stations, & data logging applications. Easy to use with I2C-compatible devices.Delivered in 5 to 10 days€ 12,85 Incl. VAT
- Pololu High-Power Motor Driver 36v20 CS Pololu #1457 This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The compact 1.8×1.2-inch board supports a wide 5.5 to 50 V voltage range and is efficient enough to deliver a continuous 20 A without a heat sink.Delivered in 5 to 14 days€ 107,45 Incl. VAT
- Sharp GP2Y0A21YK0F Analog Distance Sensor 10-80cm Pololu #136 The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. With a detection range of 4″ to 32″ (10 cm to 80 cm) and an analog voltage indicating the distance, this sensor is very easy to use.Delivered in 5 to 14 days€ 21,80 Incl. VAT
- Sharp GP2Y0A02YK0F Analog Distance Sensor 20-150cm Pololu #1137 The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to sonar in some applications.Delivered in 5 to 14 days€ 19,40 Incl. VAT
- Baby Orangutan B-328 Robot Controller Pololu #1220 The Baby Orangutan B-328 is a very compact but complete robot controller, packing a high-performance ATmega328P AVR microcontroller (with 32 KB of program memory and 2 KB of RAM) and two motor drive channels in the same 24-pin form factor as competing units that include just a microcontroller.Delivered in 5 to 14 days€ 19,95 Incl. VAT
